TECHNOLOGY VALUABLE SYSTEMS PTE., LTD

Broacast Solutions and Integration

Welcome Visitor you can Login / Register
 
Imagine_SelenioX100

Selenio X100™

Selenio X100™ delivers a wide array of analog and digital real-time baseband video and audio processing capabilities, along with the exceptional quality and dependability that have been the hallmark of the popular, award-winning Imagine Communications series of 1RU processors.

Compare Products

Animated logo generator/inserter (1/9th screen size) with up to 80 seconds for 1080p, 160 seconds for 1080i/720p, 900 seconds for 480i/576i)

Program delay with up to 20 seconds for 1080p, 40 seconds for 1080i/720p, 220 seconds for 480i/576i

Dolby Digital Plus codecs and RTLL Real Time Loudness Control

Video thumbnails support for the input and output of the 2 processing channels

Insertion of closed captioning data from serial port

Support continuous numbering of SCTE-104 messages (remap mode) when mixing messages from GPI trigger and embedded SCTE-104 packets

Support for more SFPs (Dual channel HD-BNC inputs and outputs, combination of HD-BNC and optical Input and output, SD/HD to DVI Converter, SD/HD to HDMI Converter)

Intelligent dual-channel frame sync/delay, proc amp, noise reduction, clipping and color correction

Support for all 1080p/psf production formats (23.98, 24, 25, 29.97, 30)

True optional dual-channel processing for analog video

Data Wrangler VANC processing for known and unknown data types

Rules Engine for custom signal flow management

Fast frame sync, fast conversion, delay (lock to one input), program delay and time base corrector (TBC) modes

Advanced 3D adaptive 10-bit motion detection for up/down/cross/aspect ratio conversion

Basic frame rate conversion built-in and optional single-channel linear frame rate conversion

Two switchable auto-sensing 3G/HD/SD inputs

Dual up/down/cross/aspect/basic ratio conversion

Noise reduction (mosquito and block), sharpness and texture controls

Two aspect ratio converters with full control over H/V size and position with AFD support

Built-in video test and audio tone generators

Redundant power supplies

Dual logo generator/inserters

Static built-in, can be used for a trouble slide

Optional 1/9 screen animated logos

I-Wings side bar insertion when upconverting

Audio de-embed/embed, sync, delay, gain, invert and delay with 32 channels (eight groups) processing

PCM and non-PCM (Dolby® Digital Plus, Dolby® Digital, Dolby® E) passthrough

Options for Dolby® Digital Plus, Dolby® Digital, Dolby® E decode and encode (up to 2 Dolby decoders and encoders)

Options for DTS Neural Surround Upmix, Downmix, Multimerge and DTS Neural Loudness Control

Video Interfaces:

Auto-sensing for SD-SDI, HD-SDI, 3G-SDI

Two SDI inputs (2 HD-BNC, Dual SFP)

Four SDI Outputs (4 HD-BNC, Dual SFP)

EDH/CRC error monitoring and insertion

HDMI output

Optional dual channel composite and component analog video

Audio Interfaces

Eight-channel analog audio

2 x 4 groups embedded audio

16 AES (75 ohms) configurable ports (16 in, 14 in/2 out, 12 in/4 out …… 16 out)

Data and Metadata

Up to 16 services including:

CC (CEA608/708), Teletext (OP47) captions

ARC data (WSS/VI/AFD)

Audio metadata (Dolby)

User cue data GPI trigger insertion/extraction using SCTE-104 or BT-1865

BrandNet

LIDIA

Timecode

ARIB audio mode

Pass up to 10 user DID/SDID when converting video

Control and Monitoring

100/100BT Ethernet connectivity

SNMP compliant

Built-in web control and monitoring

Local control panel

CCS™ compliant

Selenio X50™ and X85™ control panels

Magellan™ network control panels

Magellan CCS™ Navigator

Four customizable GPI inputs and outputs

Reviews

There are no reviews yet.

Be the first to review “Selenio X100™”

COMPOSITE VIDEO INPUT (X100 OPT­AVIO REQUIRED)
Standard NTSC (SMPTE170M) PAL-B (ITU624-2) PAL-M
Connector HD-BNC
Quantization 12 bits (NTSC, PAL-B, PAL-M)
TBC mode: 8 bits (all standards)
Input level 1 V pk-pk
Impedance 75 ohms
Return Loss >40 dB, 0.1 to 6 MHz
Common Mode Range 5 V
CMRR 60 dB @ 50/60 Hz, 5 V pk--pk
Setup Level Range ±7.5 IRE
Frequency Response ±0.1 dB, 0.1 to 6 MHz
SNR 62 dB, typical
Y/C Gain Error <0.1 dB
Y/C Delay Error <10 ns
COMPONENT VIDEO INPUT (X100 OPT­AVIO REQUIRED)
Format YPbPr (Betacam/SMPTE), RGB
Connector Amphenol HD-BNC
Quantization 12 bits
Input level 1 V pk--pk
Impedance 75 ohms
Return Loss >40 dB, 1 kHz to 6 MHz
SNR >60 dB
3G/HD/SD-SDI VIDEO INPUT
Number of inputs 2
Standard 3G: SMPTE 424M (2.97, 2.97/1.001 Gb/s)
HD: SMPTE 274M, SMPTE 292M (1.485, 1.485/1.001 Gb/s)
SD: SMPTE 259M-C (270 Mb/s, 525/625 component video)
Connector HD-BNC
Impedance 75 ohms
Return Loss >10 dB, typical, from 1485 to 2970 MHz
>15 dB, typical, from 5 to 1485 MHz
>20 dB, typical, from 5 to 270 MHz
Equalization 3G: Adaptive cable equalization for up to 492 ft (150 m), typical, of Belden 1694A coaxial cable
HD-SDI: Adaptive cable equalization for up to 607 ft (185 m) typical, of Belden 1694A coaxial cable
SD-SDI: Adaptive cable equalization for up to 1310 ft (400 m) typical, of Belden 8281 coaxial cable
FIBER VIDEO IN (VIA SFP PORT)
Number of Inputs 2
Standard 3G: SMPTE 424M
HD-SDI: SMPTE 292M
SD-SDI: SMPTE 259M
Connector LC
Laser Safety Level Class 1
AUDIO INPUT
Unbalanced AES Input
Number of Inputs 16, 14, 12 … 2 (shared with AES outputs, software configurable)
Connector HD-BNC
Impedance 75 ohms
Return Loss >25 dB, 0.1 to 6.0 MHz
Sensitivity <100 mV
Input Audio Sampling Rate 32  to 108 kHz
BALANCED AES INPUT (WITH EXTERNAL BALUN)
Number of Inputs 16, 14, 12 … 2 (shared with AES outputs, software configurable)
Connector XLR with external balun
Sensitivity <200 mV
Impedance 110 ohms ±20% (0.1 to 6 MHz)
Maximum Input Signal 10 V pk-pk
Common Mode Rejection 0 V to 7 V (0  to 20 kHz)
Input Audio Rate 32 to 108 kHz
ANALOG AUDIO INPUT
Number of Inputs 8 mono channels
Type Balanced
Connector DB-25, Tascam-style cable snake for balanced 8-channel audio
Input Audio Level 28 dBu to 12 dBu (adjustable in 1 dB increments)
Input Impedance High-Impedance or 600 ohms, jumper selectable
CMRR >80 dB @ 60 Hz, typical
Linearity <±0.5 dB, typical
Frequency Response <±0.1 dB (20 Hz to 20 kHz), typical
THD >90 dB (20 Hz to 20 KHz), typical
SNR >100 dB, typical
VIDEO OUTPUT
Fiber Video Output (Via SFP Port)
Number of Outputs 2
Standard 3G: SMPTE 424M
HD-SDI: SMPTE 292M
SD-SDI: SMPTE 259M
Connector LC
Output Wavelength 1310 ±30 nm
Output Power -7 dBm (typical) to 0 dBm
Rise/fall Time 3G: <105 ps/120 ps, typical
Jitter 3G: <45 ps, typical
HD-SDI: <60 ps, typical
SD-SDI: <110 ps, typical
Laser Safety Level Class 1
HDMI OUTPUT
Number of outputs 1
Standards 1080p/60, 1080p/59.94, 1080p/50, 1080p/30, 1080p/29.97, 1080p/25, 1080p/24, 1080p/23.98 1080i/60, 1080i/59.94, 1080i/50, 1080psf/24, 1080psf/23 720p/60, 720p/59.94, 720p/50 525, 625, 640 x 480p
Compliance HDMI 1.4a
Connector HDMI type A
COMPOSITE VIDEO OUTPUT  (X100 OPT­AVIO REQUIRED)
Standard NTSC, PAL-B, PAL-M
Connector HD-BNC
Quantization 12 bits
Impedance 75 ohms
Return Loss >40 dB, 0.1 to 6 MHz
Frequency Response ±0.1 dB to 5.5 MHz, typical
DC Offset <0.5 mV
Differential Gain <0.5%
Differential Phase <1°, typical
Y/C Gain <1°, typical
Y/C Delay NTSC: <10 ns, typical
PAL: <20 ns, typical
Transient Response <0.5% K Factor
SNR >60 dB to 5.5 MHz
COMPONENT VIDEO OUTPUT  (X100 OPT­AVIO REQUIRED)
Format YPbPr (Betacam/SMPTE)
Connector HD-BNC
Quantization 12 bits
Impedance 75 ohms
Return Loss >40 dB, 1 kHz to 6 MHz
DC offset <0.5 mV
SNR >60 dB, typical
3G/HD/SD-SDI OUTPUT
3G/HD/SD-SDI Output Video
Number of outputs 2
Standard 3G: SMPTE 424M (2.97, 2.97/1.001 Gb/s)
HD: SMPTE 274M, SMPTE 292M (1.485, 1.485/1.001 Gb/s)
SD: SMPTE 259M-C (270 Mb/s, 525/625 component video)
Connector HD-BNC
Impedance 75 ohms
Return Loss >10 dB, typical, from 1485 to 2970 MHz
>15 dB, typical, from 5 to 1485 MHz
>20 dB, typical, from 5 to 270 MHz
Signal Level 800 mV ±10%
DC Offset 0 V ±0.5V
Rise and Fall Time 3G: <135 ps (20% to 80%)
HD: <270 ps (20% to 80%)
SD: 400 - 1500 ps (20% to 80%)
Overshoot <10% of amplitude (all outputs terminated)
Jitter Timing jitter: 3G: <2 UI pk-pk
HD: <1 UI pk-pk
SD: <0.2 UI pk-pk
Alignment jitter: 3G: <0.3 UI pk-pk
HD: <0.2 UI pk-pk
SD: <0.2 UI pk-pk
AUDIO OUTPUT
Unbalanced AES Output
Number of outputs 16, 14, 12 … 2 (shared with AES outputs, software configurable)
Standard AES 3, SMPTE 276M
Type Unbalanced, AC coupled
Connector HD-BNC
Impedance 75 ohms
Return Loss >25 dB, 0.1 to 6 MHz
Signal Amplitude 1.0 V pk-pk, 10% into 75 ohms load
Audio Sampling Rate 48 kHz
Rise/Fall Time 30 ns to 44 ns (10 to 90%)
Bits 24, 20, or 16
Channel Status and User Bit Maintained, but professional mode, 48 kHz
BALANCED AES OUTPUT (WITH EXTERNAL BALUN)
Number of Outputs 16 (shared with AES inputs, software configurable)
Type Balanced, transformer coupled
Connector XLR with external balun
Impedance 110 ohms, 20% (0.1 to 6 MHz)
Signal Amplitude 1.0 V pk-pk, 10% into 75 ohms load
Audio Sampling Rate 48 kHz
Rise/Fall Time 30 ns to 44 ns (10 to 90%)
Bits 24, 20, or 16
Channel Status and User Bits Maintained, but professional mode, 48 kHz.
BALANCED AES OUTPUT (WITH EXTERNAL BALUN)
Number of Outputs 16, 14, 12 … 2 (shared with AES outputs, software configurable)
Type Balanced, transformer coupled
Connector XLR with external balun
Impedance 110 ohms, 20% (0.1 to 6 MHz)
Signal Amplitude 2 to 7 V pk-pk into 110 ohms load
Audio Rate 48 kHz
Jitter ±20 ns
Rise/Fall Time 5 ns to 30 ns (10 to 90%)
Bits 24, 20 or 16
Channel Status and User Bits Maintained, but professional mode, 48 kHz.
ANALOG AUDIO OUTPUT
Number of Inputs 8 mono channels
Type Balanced
Connector DB-25, Tascam-style cable snake for balanced 8-channel audio
Output Audio Level 28 dBu to 12 dBu (adjustable in 2 dB increments)
Output Impedance 66 ohms
Frequency Response <±0.2 dB (20 Hz to 20 kHz), typical
THD >90 dB (20 Hz to 20 kHz), typical
SNR >93 dB, typical
Crosstalk >95 dB, 20 Hz to 20 kHz, typical
Linearity <±1.0 dB (to -100 dBFS), typical
MISCELLANEOUS
Genlock
Connector HD-BNC
Impedance 75 ohms
Return Loss >40 dB 25 Hz to 10 MHz (SMPTE 318M-1999)
>45 dB 25 Hz to 10 MHz
>40 dB 10 MHz to 30 MHz
Common Mode Range 5.5 V pk-pk
CMRR 60 dB @ 60 Hz, 5 V pk-pk
Input Level NTSC/PAL-B: 1 V pk-pk, -6.0 dB to +6.0 dB
Tri-Level Sync: ±300 mV, -6.0 dB to +6.0 dB
1080i: 59.94/50
1080p: 29.97/25/23.98
1080psf: 23.98
720p: 59.94/50
Signal Type NTSC/PAL-B Analog Composite
±300 mV Tri-Level Sync
Standards SMPTE 170M (NTSC)
ITU-R BT.470-6 (PAL-B)
SMPTE 274M (1080i, 1080p)
SMPTE 292M (720p)
DARS INPUT
Standard AES3, SMPTE 276M
Type Unbalanced, AC-coupled
Connector HD-BNC
Sensitivity 100 mV
Impedance 75 ohms
Return Loss >25 dB, 0.1 to 6 MHz
Sampling Rate 48 kHz
RS-232/422/485
Number of Rx Ports 2 RS-422/485 or RS-232
Number of Tx Ports 2 RS-422/485 or RS-232
Electrical EIA-232-C, EIA-422-B, EIA-485-A
Connector Samtec TFM-110-01-L-D-RE1-WT 20 pin-connector
RS-232/422/485 switchable from user control
RS-422 termination through jumpers
LAN
Number of Connectors 1
Connector RJ-45
Type 10/100 Base-T Ethernet as defined by IEEE 802.3
GENERAL PURPOSE INTERFACE
Connector 6-position screw terminal (Weidmuller 1607080000)
Inputs +5 V
Outputs Relay controlled contact closure
Power On: Circuit normally open
Power Off: Circuit closed
Signal Level +/-75 V w.r.t to GPO common
Power Consumption The Selenio X100 provides redundant power; during normal operation, both power supplies are on. However, only one is powering the frame at any time. The line voltage is auto-detected
Temperature 14° to 113° F (-10° to 45° C), with a relative humidity of <95% non-condensing.
Power Use 100-240 VAC, @ 47-63 Hz, 2.5 A (X2)
FRAME DIMENSIONS
Height 1RU
Width 19 in. (48.3 cm)
Depth front mounting ear to end of longest rear connector 24.2 in. (61.5 cm)